♦ Contionuous drying for batch production.
♦ For rod,granulate materials with better air permeability.
♦ Especially for those with hgh humidity,low permissable tempera- ture like dewatering vegetable. Chinese medicine slices etc.
♦ Applicable for paste materials of dewatering residue in the form ,of granulater or bar.
♦ The drier features high speed, high steam strength and high quality.
♦ The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and it is drawn and moved inside the drier by a transmission device. The drier is composed of several units. For each unit the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-Belt covered with the material from the top to the bottom of from the bottom to the top and this will complete the heat and mass transfer process. This process will bring the material water away .The mesh-belt moves slowly Runnin speed can be freely adjusted according to the material temperature. The final products after the drying will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users' demand. The unit number can be selected according to the demand
♦ For rod,granulate materials with better air permeability.
♦ Especially for those with hgh humidity,low permissable tempera- ture like dewatering vegetable. Chinese medicine slices etc.
♦ Applicable for paste materials of dewatering residue in the form ,of granulater or bar.
♦ The drier features high speed, high steam strength and high quality.
♦ The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and it is drawn and moved inside the drier by a transmission device. The drier is composed of several units. For each unit the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-Belt covered with the material from the top to the bottom of from the bottom to the top and this will complete the heat and mass transfer process. This process will bring the material water away .The mesh-belt moves slowly Runnin speed can be freely adjusted according to the material temperature. The final products after the drying will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users' demand. The unit number can be selected according to the demand
Tpye | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 | |
Quantity of unit | 4 | 5 | 4 | 5 | 4 | 5 | |
Width of belt(m) | 1.2 | 1.6 | 2 | ||||
Length of drying section(m) | 8 | 10 | 8 | 10 | 8 | 10 | |
Thickness of spread raw material (mm) | <= 60 | ||||||
Temperature of operation(ºC) | 50~140 | ||||||
Pressure of steam(MPa) | 0.2-0.8 | ||||||
Consumption of steam(kg/h) | 120-300 | 150-375 | 150-375 | 170-470 | 180-500 | 225-600 | |
Drying time(h) | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | |
Drying strength(kg/h) | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 | |
Total power of equipment(kw) | 11.4 | 13.6 | 11.4 | 13.6 | 14.7 | 15.8 | |
Overall dimensions |
L (m) | 9.56 | 11.56 | 9.56 | 11.56 | 9.56 | 11.56 |
W (m) | 1.49 | 1.49 | 1.9 | 1.9 | 2.32 | 2.32 | |
H (m) | 2.3 | 2.3 | 2.4 | 2.4 | 2.5 | 2.5 | |
Weight(kg) | 4500 | 5600 | 5300 | 6400 | 6200 | 7500 |